How to bridge tplink router

How to bridge TPLink router

In a home or office network, the bridging function of TPLink router can help expand wireless coverage and solve the problem of signal dead spots. This article will introduce the bridging steps of TPLink router in detail, and attach recent hot topic data for reference.

1. TPLink router bridging steps

1.Preparation: Make sure that the main router is connected to the Internet normally, and the secondary router (TPLink router used for bridging) is restored to factory settings.

2.Log in to the management interface: Use a computer or mobile phone to connect to the WiFi of the secondary router and enter it in the browsertplinkwifi.netor192.168.0.1, enter the default account password (usuallyadmin/admin).

3.Enable bridging function: Found in the management interfacewireless settingsorNetwork settings, selectWDS bridgingmode, scan and select the WiFi signal of the main router.

4.Enter the main router password: Fill in the WiFi password of the main router, save the settings and restart the secondary router.

5.Verify bridging successful: After restarting, check whether the WiFi signal of the secondary router is normal and whether the device can access the Internet through the secondary router.

2. Precautions

- Main and secondary routers are requiredsame frequency band(For example, both are 2.4G or 5G).

- It is recommended to set the IP address of the secondary router to be the same as the primary routerDifferent network segments(For example, the main route is 192.168.1.1 and the secondary route is set to 192.168.0.1).

- The WiFi name (SSID) of the secondary router after bridging can be the same as or different from the main router, set according to needs.

3. Reference of recent hot topics (last 10 days)

4. Frequently Asked Questions about Bridging

Q1: What should I do if the network speed becomes slower after bridging?
A: Check the distance between the main and secondary routers, it is recommended not to exceed 10 meters; avoid signal interference (such as microwave ovens, Bluetooth devices).

Q2: The secondary router cannot connect to the main router?
A: Confirm that MAC address filtering is not enabled on the main router and the WiFi password entered on the secondary router is correct.

Q3: How to enhance bridge stability?
A: Fix the channels of the primary and secondary routers (such as 2.4G channel 6), and update the router firmware regularly.

Through the above steps, you can easily complete the bridge setting of TPLink router. If you still have problems, it is recommended to refer to the official manual or contact TPLink customer service.