What should I do if my new house is cold?
Recently, the issue of cold new homes has become a hot topic of discussion for many homeowners. Especially in winter or wet seasons, a cold new house not only affects the living comfort, but may also cause health problems. This article will combine the hot topics and hot content on the Internet in the past 10 days to analyze the causes and solutions of cold new homes for you.
1. Common reasons why new homes are cold
According to feedback from netizens and professional analysis, the main reasons for the coldness of new homes include the following points:
| Reason | Proportion | Specific performance |
|---|---|---|
| The wall is not dry yet | 35% | After the renovation of the new house, the wall moisture content is high, causing the interior to be damp and cold. |
| Poor ventilation | 25% | The structural design of the house is unreasonable and the air circulation is poor |
| Poor insulation material | 20% | Insulation materials used by developers have insufficient performance |
| Floor heating/heating effect is poor | 15% | Problems with heating system design or installation |
| Others | 5% | Including factors such as the orientation of the house and the surrounding environment |
2. Practical solutions to solve the coldness of new homes
In response to the above problems, combined with expert advice and netizen experience, we have compiled the following solutions:
| solution | Applicable situations | Performance rating |
|---|---|---|
| Improve ventilation | Walls are not dry and poorly ventilated | ★★★★☆ |
| Use a dehumidifier | Cold caused by high humidity | ★★★★★ |
| Add insulation | Poor insulation material | ★★★★☆ |
| Check heating system | Floor heating/heating effect is poor | ★★★☆☆ |
| Use electric heater | Temporary solution | ★★★☆☆ |
3. Moisture-proof and cold-proof tips hotly discussed by netizens
In the past 10 days of online discussions, the following moisture-proof and cold-proof methods have received widespread attention:
1.Lime moisture absorption method: Placing quicklime in the corner of the room can effectively absorb moisture in the air.
2.Salt water mopping: Mopping the floor with warm salt water can accelerate water evaporation and reduce indoor humidity.
3.plant regulation: Place hygroscopic plants such as Sansevieria or aloe vera.
4.Open windows regularly: Open windows for ventilation from 10 am to 3 pm every day, which is the best ventilation period.
5.Use moisture-proof paint: Apply moisture-proof paint on the wall to form a protective layer.
4. Professional advice: Moisture-proof treatment before moving into a new house
Many decoration experts suggest that the following moisture-proof treatments should be done before moving into a new house:
| Processing steps | Operational points | time required |
|---|---|---|
| Wall dryness inspection | Use a professional hygrometer to detect | 1 day |
| Full ventilation | All windows and doors open for convection | 7-15 days |
| Moisture-proof primer treatment | Apply moisture-proof primer | 2-3 days |
| Floor moisture-proof treatment | Laying moisture-proof membrane | 1 day |
5. Long-term solution: Improve house insulation performance
For long-term living, improving the insulation performance of the house is the most fundamental solution:
1.Exterior wall insulation renovation: If possible, an exterior wall insulation system can be used.
2.Replace doors and windows: Install double- or triple-glazed broken-bridge aluminum doors and windows.
3.Floor heating system upgrade: If conditions permit, you can consider installing floor heating.
4.Ceiling insulation: Add insulation material to the suspended ceiling.
5.Intelligent temperature control system: Install intelligent temperature control equipment to accurately adjust indoor temperature.
Through the above measures, the problem of coldness in new houses can be effectively improved. It is recommended that owners choose a solution that suits them based on the actual situation, and consult a professional decoration company or construction engineer if necessary.
check the details
check the details
en
